The instrument's scale ranges from +0.1 to +10.0. The unit of measure is "Implantest values," which correspond to the contact time of the probe with the measured object (tooth, implant). A short contact time corresponds to a high Implantest value; a long contact time corresponds to a low Implantest value.
Complete system includes the following:
- Implantest including probe
- Lithium-ion polymer battery (built-in)
- Switch mode power supply unit
- Battery charger
- Test sleeve
- Cleaning brush
- Operating Instructions
Implantest is based on the long term technology and clinical success of the Periotest measuring device.
Getting Started Hints: during the measuring process the Implantest must be held horizontally with a maximum deviation of approximately +/- 25 degrees. A distance of 1 to 2mm is necessary between tip of probe and target. Conduct a series of test measurements on a model to learn positioning prior to use.
|